W050 Tilt Arbor Spindle Moulder
2.8kW Induction Motor
Four Speeds with Digital read-out
Sliding Beam 48” Capacity
Cast Iron Main Table
45° Backwards Tilting Spindle
Independently Adjustable Fences
Optional Outrigger with Squaring Arm
Reversible Spindle Direction
A large precision ground cast iron table forms the main table, with a sliding beam in front, which includes a mitre fence and work clamp as standard equipment.
A mechanically braked motor offers ample power to use tooling up to 200mm in diameter with a choice of four speeds to allow a wide range of tooling to be used. A digital speed display informs the operator of the current setting. Further versatility is provided by the backwards tilt facility. The spindle hood is of cast alloy and is fitted with long, fully adjustable fences, a vertical hold down, front clamp and a 100mm dust outlet. A hinged lid allows for easy access when setting the tooling.
Supplied with set of spindle spacers, table inserts (80mm, 110mm & 150mm), cable and 16amp plug.
The optional outrigger table with telescopic support arm is ideal for those working with larger panels or longer lengths of timber. A squaring arm can be set to any angle and has a flip-over sliding length stop graduated in millimetres up to 1500mm.
The optional Ring Fence allows safe working when putting an edge moulding onto curved shaped pieces. It consists of a round fence to control the depth of cut, a transparent cutter guard, a lead in guide and a 100mm diameter extraction outlet.
Motor (induction) 2800w (3.75hp), 240v
Main table size 1000mm x 360mm
Sliding carriage size 1000mm x 240mm
Sliding carriage stroke 1200mm
Spindle diameter 30mm
Spindle Tilt +5 to - 45 degrees
Speeds 4 (1800, 3000, 6000 & 9000rpm)
Vertical stroke 100mm
Maximum tooling diameter (above table) 200mm
Maximum tooling diameter (below table) 180mm
Table aperture depth 50mm
Table height 900mm
Dust extraction outlet 100mm
Dimensions (WxDxH) 1000mm x 1300mm x 1250mm
Warranty 1 Year