ShopMenu

Trend Hinge Jig 2 Part in case



Price:

€360.00

Quantity:
Stock:
2
Weight:
0 - 3kg

Trend Hinge Jig Two Part in Case H/JIG/A

The Hinge Jig is a portable template set designed for recessing hinges in wooden doors & frames.

  • It is easy to use with minimal setting-up time, completing the job both accurately & quickly.
  • Used on-site & in joinery shops to increase productivity with excellent results.
  • Four apertures for fire door requirements.
  • No need for marking out in the conventional way.
  • Quick & simple to set-up as the hinge is used as the pattern.
  • Clean & accurate recesses are achieved every time.
  • Suitable for timber based doors & square butt hinges.
  • Can be used on both inside and outside doors.
  • Use with a light duty plunge router with 1/4 inch collet.
  • Long reach router cutter required, 12mm diameter with 70mm overall length.
  • Angled position slots to prevent creep.
  • Unibase may be needed.
  • T4EK router requires a ref. UNIBASE or special guide bush ref. GB/T4/160. 

SpecificationsMetric & imperial conversion :

Hinge sizes possible:

  • Length min. 2 5/8" (67 mm)
  • Length max. 5" (127 mm)
  • Width min. 3/8" (9.5 mm)
  • Width max. 1 3/8" (35 mm)
  • Width max. in 35mm rebate 20 mm
  • Width max. in 44mm rebate 30 mm

Door sizes possible :

  • Height min. 6' 5" (1955 mm)
  • Height max. 2100 mm*
  • Thickness min. 5/8" (16 mm)
  • Weight 3.3 kg
  • Jig overall length 1957 mm
  • Please note for doors over 2040mm the bottom hinge will be higher than 9" up.

Supplied with:

  • 4 x Apertures
  • 2 x Bradawls with Spacers
  • 1 x 16mm Guide Bush
  • 1 x T Handle Hex Key
  • 1 x 4mm Spacing Gauge
  • 1 x Carry Case

 

images are for illustration purposes only

 

 

 

You may also like to try....

Trend KWJ900 Kitchen Worktop Jig

€210.00

Trend Router T10EK 240V

€425.00

Top