This product is currently out of stock
Large capacity, bench top planer thicknesser.
The largest in our bench top machines, still light enough to move off the bench when not in use. The capacity is increased to allow 10″ x 5″ timber to be accurately dimensioned.
The planing beds are precision ground aluminium and the guide fence is a rigid aluminium extrusion which can be tilted and locked at any angle up to 45 degrees when required.
The steel thicknessing bed has an extension arm on the outfeed side and is supported in each corner by chain driven adjusting screws. Once the height is set, rubber coated feed rollers pass the timber through the high speed cutter block leaving a beautiful finish with no roller marks.
Surfacing width | 252mm (10″) |
Length of surfacing tables | 915mm |
Maximum planing depth of cut | 2mm |
Fence tilt | 90 – 45 |
Table height | 360mm |
Thicknessing capacity | 5 – 125mm (1/4″ – 5″) |
Length of thicknessing table | 270mm |
Feed speed | 8m/min |
Maximum depth of cut | 2mm |
Cutterblock speed | 9000rpm |
Number of knives | 2 |
Motor (carbon brush) | 1500w (2hp), 240v |
Dimensions (WxDxH) | 945mm x 470mm x 480mm |
Weight | 30kg |
Assembly Time Required | 5 Minutes |
Rating |
Hobby |