Product Description
Trend Lock Jig lock/jig
This jig uses a set of interchangeable templates & with a router will cut the mortise & face-plate recess for popular door locks.
- For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate.
- Deeper mortises can be achieved with a suitable size of auger bit.
- Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood.
- Steel plates & body.
- An auger bit and drill is required to complete deep mortises.
- The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter.
- A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise.
inludes :
- 1 x Guide Bush Collar
- 12 x Faceplate Templates
- 4 x Mortice Templates
- 6 x Spacer Fingers
SpecificationsMetric & imperial conversion:
- Door thickness min. 34 mm Door thickness max. 58 mm
- Template outer size 234.3 x 59.8 x1.5mm
Includes templates for locks having the following face-plate dimensions:
Metric (Imperial approx.) (D x OL) Template
- 22.2x156 mm (7/8"x 6 1/8") 1
- 22.5x152.5 mm (7/8"x 6") 2
- 25.4x121 mm (1"x 4 3/4") 3
- 25.4x127.5 mm (1"x 5") 4
- 25.4x133.5 mm (1"x 5 1/4") 5
- 25.4x145 mm (1"x 5 3/4") 6
- 25.4x153 mm (1"x 6") 7
- 25.4x156.5 mm (1"x 6") 8
- 25.4x165.5 mm (1"x 6 1/2") 9
- 25.4x177 mm (1"x 7") 10
- 25x57.5 mm (1"x 2 1/4") 11 UPPER
- 26x56.5 mm (1"x 2 1/4") 11 LOWER
- 25.6x162mm (1"x 6 3/8") 12
Mortise Lock Dimensions Imperial (Metric) (D x OL) Template
- 16x72 mm* (5/8" x 2 7/8") A
- 16x107 mm* (5/8" x 4 1/4") B
- 19x78 mm* (3/4" x 3 1/8") C
- 19x109 mm* (3/4" x 4 1/4") D
*These are maximum mortise lock case (body) lengths, unless radius ends are squared with a chisel. Actual length of mortise is 7mm longer.
